Electronic Fetal Monitoring

Why It Is Done

External monitoring

This type of monitoring is done to:

• Keep track of your baby's heart rate.
• Measure how often you have contractions and how long they last.
• Find out if you are having preterm labor.
• Check on your baby's health if your doctor thinks there may be problems. External electronic fetal monitoring will be done during a nonstress test to check your baby's heart rate while at rest and while moving. If your baby does not move during this test, more tests will be needed.
• Check your baby's health if your doctor thinks the baby is not getting enough oxygen because of problems with the placenta. If a stress test shows that your baby is not getting enough oxygen, your doctor may suggest starting (inducing) labor early. Or your doctor may talk to you about a cesarean section (C-section).
• Check your baby's health if your baby has not been growing normally. (This is called delayed fetal growth.) Monitoring may also be done if you have diabetes or high blood pressure or if you are over 41 weeks pregnant.

Internal monitoring

This type of monitoring is done to:

• Find out if the stress of labor is putting your baby's health at risk.
• Measure the strength and length of your labor contractions.

How To Prepare

In general, there's nothing you have to do before this test, unless your doctor tells you to.

How It Is Done

External monitoring can be done at any time after 20 weeks of pregnancy. Internal monitoring is used only when you are in labor and your amniotic sac has broken. If it is needed and your amniotic sac has not broken, your doctor may break the sac to start the test.

Sometimes both types of monitoring will be done at the same time. Your baby's heart rate may be checked with an internal sensor, and your contractions may be checked with an external or internal sensor.

External monitoring

For external monitoring, you may lie on your back or left side. Two belts with sensors attached will be placed around your belly. Gel may be applied to provide good contact between the heart rate sensors and your skin. The sensors are attached with wires to a recording device. This device can show or print out a record of your baby's heart rate and the duration of contractions. The position of the heart rate monitor may be changed now and then as your baby moves.

For a nonstress test, you may be asked to push a button on the machine every time your baby moves or you have a contraction. Your baby's heart rate is recorded. Then it's compared to the record of movement or your contractions. This test usually lasts about 20 to 40 minutes.

Internal monitoring

For internal monitoring, you will usually lie on your back or left side. A thin wire (electrode) will be put through your cervix and attached to your baby's scalp. A band is placed around your upper leg to keep the monitor in place. The electrode is attached with wires to a recording device that can show or print out a record of your baby's heart rate.

In some cases a small tube that measures contractions may also be placed through your cervix and into your uterus. The tube connects to the recording device, which shows or prints the strength and length of your contractions.

How It Feels

You may have some discomfort if you are having contractions. And the belts that hold the sensors in place may feel tight.

You may be able to change position or move around more during internal monitoring than during external monitoring.

You may have discomfort if an internal contraction monitor is put into your uterus.

Risks

Electronic fetal monitoring may be linked to an increase in cesarean deliveries. It may also be linked to the use of a vacuum or forceps during delivery.^{footnote 1}

There is a slight risk of infection for your baby when internal monitoring is done.

Results

The results are usually ready right away. Here are some examples of normal and abnormal results.

Fetal monitoring can't find every type of problem, such as birth defects. A normal result does not guarantee that your baby is healthy.